SPECIFICATIONS :
Model Name: Brew-Magic V350-MS Brewing System.
With Unitronics Vision 350 Touchscreen, 3-1/2", 256 color,
QVGA controller utilizing Sabco's 'Magic-Soft' programming.
Kettle type: Stainless, 15.5 gal with handles, heavy-duty
Kettle setup: Boil ( lower), Mash (Center), Sparge HL (right)
Connector type: Stainless, 1/2" Pharmaceutical quality Tri-Clamp
Frame type: Commercial duty, powder coat, baked enamel
Frame kettle decking: Stainless steel
Casters: Heavy duty swivel, two of the four are locking type. ( 4.5" T )
Brewery Size: ( with Casters ) 67.5" Long X 62.5" High X 20" Wide.
Deck Height : Upper deck 39.5". Lower deck 18".
Height to top of upper kettles : 62.5"
Height to top of lower kettle: 41.25"
Weight: 289 Lbs.
Electrical Requirements: 120V, 15 Amp, 1800 Watt, 60 Cycle, Grounded
Can be converted from 220V with available step-down transformer.
( Sold separately by Sabco )
Gas burner type: Cast ring diffusion type with fully adjustable air mix venting
Gas Requirements: Customer choice of setup for use with either : Natural Gas or Propane ( LPG).
Nat. Gas inlet pressure @ approx. 7" water column, produces approx. 35,000 btu per burner.
Propane inlet pressure @ 120 psi , must be used with included adjustable regulator ( 0-15psi )
to produce 0 - 55,000 btu per burner.
SHIPPING INFORMATION:
Standard Shipping Carton size: 88" Long X 30" Wide X 51" Tall
Standard Shipping Weight: 450 Lbs.
Overseas Shipping Crate size: 96" Long X 40" Wide X 52" Tall
Overseas Weight: 600 Lbs.
Note: Shipping dimensions and weight may vary if additional items are added to the order.
BREWING CAPACITY : 5 -14 gal. / batch. A second batch can be mashing while the first is
boiling. This allows consecutive, rapid brewing procedures, for volume production.
Model Name: Brew-Magic V350-MS Brewing System.
With Unitronics Vision 350 Touchscreen, 3-1/2", 256 color,
QVGA controller utilizing Sabco's 'Magic-Soft' programming.
Kettle type: Stainless, 15.5 gal with handles, heavy-duty
Kettle setup: Boil ( lower), Mash (Center), Sparge HL (right)
Connector type: Stainless, 1/2" Pharmaceutical quality Tri-Clamp
Frame type: Commercial duty, powder coat, baked enamel
Frame kettle decking: Stainless steel
Casters: Heavy duty swivel, two of the four are locking type. ( 4.5" T )
Brewery Size: ( with Casters ) 67.5" Long X 62.5" High X 20" Wide.
Deck Height : Upper deck 39.5". Lower deck 18".
Height to top of upper kettles : 62.5"
Height to top of lower kettle: 41.25"
Weight: 289 Lbs.
Electrical Requirements: 120V, 15 Amp, 1800 Watt, 60 Cycle, Grounded
Can be converted from 220V with available step-down transformer.
( Sold separately by Sabco )
Gas burner type: Cast ring diffusion type with fully adjustable air mix venting
Gas Requirements: Customer choice of setup for use with either : Natural Gas or Propane ( LPG).
Nat. Gas inlet pressure @ approx. 7" water column, produces approx. 35,000 btu per burner.
Propane inlet pressure @ 120 psi , must be used with included adjustable regulator ( 0-15psi )
to produce 0 - 55,000 btu per burner.
SHIPPING INFORMATION:
Standard Shipping Carton size: 88" Long X 30" Wide X 51" Tall
Standard Shipping Weight: 450 Lbs.
Overseas Shipping Crate size: 96" Long X 40" Wide X 52" Tall
Overseas Weight: 600 Lbs.
Note: Shipping dimensions and weight may vary if additional items are added to the order.
BREWING CAPACITY : 5 -14 gal. / batch. A second batch can be mashing while the first is
boiling. This allows consecutive, rapid brewing procedures, for volume production.
|
| Indoor use is prohibited without meeting local safety regulations regarding proper ventilation. Both an exhaust hood to remove heat and spent air, as well as a source of fresh 'make-up' air, must be installed for safe indoor use of this equipment. BE SAFE ! Consult local fire marshall to obtain information and help regarding safe indoor use. |